The time when you had to dig around in a drawer or storage unit for a flashlight, worry about whether you had the necessary batteries in it, or sigh in disappointment when it wasn’t bright enough is long gone. Nowadays, all you need to do is use the versatile iPhone you are holding. That is if the flashlight on your iPhone is functional.
1. Exit Low Power Mode
To save battery life, your iPhone’s Low Power Mode turns off some capabilities. Your battery level looks yellow rather than green when it’s active. When your battery level drops below 20%, a prompt for Low Power Mode appears automatically. You can also decide to always use your iPhone in Low Power Mode to conserve battery life.
The flashlight on your iPhone, however, is frequently one of the things that this mode disables. Toggle off Low Power Mode by selecting Battery in the Settings app and going to the Battery tab.
2. Power up Your iPhone
The flashlight on your iPhone might not function even after you disable Low Power Mode. This can be due to the fact that your device’s battery is simply too low to support the feature at that time. As a result, you should start charging your iPhone by plugging it into a power source.
Once your iPhone has enough juice, the flashlight functionality should function once more.
3. Make Sure Your iPhone Isn’t Overheated.
The flashlight on your iPhone can cease working if it becomes too hot. It’s not a good idea to keep using a hot iPhone. Your device will eventually shut off until it cools down if it reaches a certain temperature limit. A warning will also show up on the screen if the temperature rises too high.
Place your iPhone in a cool, dry location away from strong sunlight to allow the temperature of your device to naturally decrease. However, you shouldn’t try to place your device in the refrigerator because doing so will harm it.
Simply look for a spot that is naturally cool and shaded. Your device should resume operation once it has cooled down, including the flashlight on your iPhone.
Also: How to Resolve the iPhone Error “location Not Available”
4. Take the Flashlight out Of the Control Panel.
One possible solution is to remove the flashlight option from the Control Center and then add it back in order to fix the problem with your iPhone’s flashlight not working. This is how:
the Settings app, then. Opt for Control Center.
Select the red “minus” (-) icon for the flashlight under Included Controls (or Torch, in some regions). To confirm, tap Remove.
Continue scrolling down to the More Controls section to bring the flashlight back.
For the flashlight, tap the plus sign (+).
5. Delete the Camera App on Your iPhone
The flash feature on your iPhone’s camera makes use of the same light as the flashlight. It’s typical to see the flashlight symbol in the Control Center greyed out if the Camera app is open. This is due to the fact that you cannot simultaneously use both functionalities.
Simply quit the Camera app and go back to your Control Center to fix this. You should observe that you can once again select the flashlight button in a typical manner.
6. Use the Camera’s Flash to Turn on Your Flashlight.
A workaround is to turn on the flashlight in the Camera app by turning on the flash feature if you are unable to turn on your iPhone’s flashlight from the Control Center. This is how:
Go to Video mode in the Camera app.
To access further options, swipe up from the bottom menu (on the word “Video”).
Click on The Flash Icon. Choose On.
7. Switch on The Flash in The Camera App on Your iPhone.
You can also try turning your camera flash on and off to get rid of any bugs that prevent your iPhone’s flashlight from functioning. The procedures to activate your iPhone’s camera flash as described in the prior solution are the same. However, switch the Flash between On and Off a few times rather than leaving it on.
8. Update the iOS on Your I Phone
iOS updates typically include solutions for numerous bugs and performance issues. Therefore, updating your iPhone to the most recent version of iOS may be all that is required to fix the flashlight issue. If you’re unsure what to do, look at our tutorial on updating your iPhone.
Also: How to Play Fortnite on iPhone and iPad for Free!
9. Switch Off Your I Phone
The next thing you should attempt is restarting your iPhone if the solutions provided above don’t fix the issue and the flashlight on your iPhone is still not functioning.
Depending on the iPhone model you have, there are different steps you need to take. In general, however, you can power down your iPhone by going to Settings > General > Shut Down, then restart it by holding the Side button down. You can consult our instructions on how to restart your iPhone if you’re unsure of what to do.
10. Recover Your I Phone from An Older Backup
You can try restoring your iPhone to a prior backup from when the flashlight was still functioning normally in addition to updating and restarting your iPhone. You should be aware that if you use this method, you will also lose any new data that has been added to your device since the last backup.
11. Reset All of Your I Phone’s Settings
Resetting the settings on your iPhone is the final resort if all else fails. Just be careful not to tap Erase All Content and Settings, as doing so will erase all of your device’s data. You won’t lose any content from your iPhone if you don’t do that, so relax.
Be aware that the reset procedure can take a while, especially if your iPhone has a lot of data. Don’t count on restarting your iPhone immediately if you’re in need of a flashlight because you’re in the dark.
Effective Fixes for Your I Phone’s Failing Flashlight
We hope this list of remedies has been helpful to you if the flashlight on your iPhone was not functioning. The best course of action is for you to get in touch with an Apple Authorized Service Provider if the problem continues. A specialist will then assess your device to identify any potential hardware issues.