Cleaning the shower head may bring back the forceful stream of water you miss if your shower has seen better days and now barely produces a trickle. Even water from a municipal system contains minerals that accumulate and obstruct the shower head’s apertures.
Additionally, the issue can be considerably more severe if you utilize well water or live in a hard water location. Once the nozzles, or apertures, are closed, the shower head becomes a warm, dark, moist environment that is perfect for mold and bacteria growth. Cleaning the shower head is now necessary.
It’s simple to learn how to clean a shower head and get rid of mineral deposits, and it also doesn’t take much scrubbing if you have the patience to let the cleaning solution soak.
You’ll be astonished at how much more opulent your shower feels after clearing the clog in the shower head. If you follow the instructions below to clean a shower head properly, you might be tempted to forego taking a peaceful bath in favor of a relaxing shower.
When Should You Clean Your Shower Head?
The shower head should be cleaned right away if you’ve never cleaned it or if the water flow is reduced. If you reside in a region with hard water, set a recurring reminder on your phone to clean the shower head thoroughly at least once every two months. Additionally, regular cleaning will prevent bacteria and mold from growing inside the shower head.
Also: 13 Organizing Hacks for Your Tidiest Fridge Yet!
You’ll require:
- Either Cleaning Vinegar or Distilled White Vinegar
- Bread Soda
- Paper Clip or A Toothpick
- Toilet Paper Tape
- Bag Made of Sturdy Plastic for Storing Food
- Twisted Ties or Rubber Bands
- Rag for Cleaning
- Deep Bucket or Bowl
- Outdated Brushes
- Pliers with A Lock or A Wrench
- Sharp-Nosed Pliers
How to Use Vinegar to Clean a Shower Head
Distilled white vinegar should be half-filled in a plastic bag. Don’t overfill the bag, as submerging the shower head could cause it to overflow.
Place the bag over the showerhead so that the vinegar is covering the entire device. If the vinegar level needs to be changed, do it right away.
Rubber bands or twist ties positioned around the shower head’s neck might be used to secure the bag. Test the bag’s stability carefully to ensure that it won’t budge once you let go. (Closing the shower door or curtain is a smart idea so that any spills are contained in the shower is also recommended.)
Allow the shower head to soak for a while. Leave a fixture that is particularly filthy overnight. If your shower head is brass, take it out of the vinegar after 30 minutes to avoid damaging the finish. If your shower head is nickel-coated, omit this approach.
Remove the bag from the shower head by untying it. Pour the vinegar down the shower drain (include little baking soda to assist eliminate soap scum accumulation in the drain) (add some baking soda to help remove soap scum buildup in the drain).
To remove any mineral buildup that has become lodged inside the fixture, run hot water through the shower head for a minute. Any nozzles that appear to still be clogged can be cleared with a toothpick or paper clip tip.
Also: On Pc and Mobile Devices, Xmovies8 Offers Free HD Streaming!
If buildup is still present, scrub the fixture with an old toothbrush dipped in dry baking soda. Pay attention to the vicinity of the holes where the water leaks. Restart the hot water to remove even more residue. Continue doing this until no more mineral deposits are visible.
For a polished appearance, polish the shower head with a gentle, lint-free cloth. To get rid of water stains and restore the shower head’s original appearance, buff and dry it.
Put the shower head in a bucket of distilled white vinegar if it is removable to make cleaning even easier. After soaking, repeat the cleaning process and reattach the fixture.
How Not to Use Vinegar to Clean a Shower Head
If you don’t have any distilled white vinegar on hand, try soaking in lemon juice and water or apple cider vinegar instead. Acids found in both lemon juice and apple cider vinegar can help dissolve mineral deposits. The same soaking and cleaning instructions apply.
Use a toothbrush and a paste of salt or baking soda that has been soaked with some lemon juice to scrub the shower head if you don’t want to wait for it to soak. Run hot water through the shower head after cleaning.
If at all feasible, disassemble the shower head so you can clean both the inside and outside of the fixture. Reassemble the shower head after a thorough rinse.
If these natural remedies don’t work, you can try using a professional showerhead descaler. Carefully adhere to the label’s instructions.
How to Clean a Shower Head’s Filter Screen
After cleaning the fixture, if the shower head is still sputtering, it is time to take the shower head apart and inspect the filter screen.
- With a wrench or pair of pliers with locks, remove the shower head.
- Use water to flush the interior to get rid of any loose particles.
- Make use of a set of needle-nose pliers to remove the filter screen.
- Use water to rinse the filter screen. If the screen has mineral buildup, soak it in vinegar or use a commercial descaler to remove it.
- Use the above-mentioned instructions to clean the rest of the shower head.
- Reattach the shower head and replace the filter screen.
- To clear out any last-minute debris, run the shower for several minutes at maximum pressure.
Also: Clean Japan: Mirable Zero showerhead doubles as tooth scrubber
How to Clean a Shower Head of Mineral Deposits
Mineral deposits can be removed from the shower head and helped to unclog by using vinegar, lemon juice, or a commercial descaler along with some scrubbing activity.
Additionally, any soap scum that may have built up on the fixture’s outside will be eliminated by the cleaners. To remove mineral buildup on the nozzles, follow the directions above. To restore the shine, be careful to dry and buff the fixture with a lint-free cloth.
Find silicone replacement shower head nozzles for your particular shower head if the nozzles are so clogged that you’d rather replace them than clean them.
Cleaning Advice for Shower Heads Frequently
When you clean the shower on a weekly basis, spray the shower head with a professional cleaner or a mixture of water and distilled white vinegar. Clean any junk out of the nozzle apertures by brushing them with a toothbrush and running the shower for a few minutes.
Perform a thorough cleaning as soon as the water flow starts to decline. Mineral deposits will continue to deteriorate.
Consider placing an outside shower head filter, like this one from AquaHome, between the shower head and the waterline to decrease mineral deposits and bacterial growth.
Pick a showerhead made of metal. Compared to metal fixtures, plastic shower heads are more prone to mold formation.
Use the bathroom fan to swiftly remove humidity before, during, and after bathing to help prevent the growth of mold and mildew.
